On Sunday, I write line of business in the home, finish after exercise, open a TV set, as it happens sees a boat sails in maritime travel. Then I think: Oneself can make a boat.
星期天，我在家里写作业，做完作业后，就打开电视机，正好看见一艘船在海上行驶。于是我想：自己可以做一艘小船。
Say to work, I seek data first: Two plastic bottle, hard paper, toothpick, red paper, scissors, sizy, trashy pen core, white paper, cord, adhesive plaster.
说干就干，我先找来材料：两个塑料瓶、硬纸、牙签、红纸、剪刀、胶水、没用的笔芯、白纸、绳子、胶布等。
After the tool is ready, with respect to start working. Do bilge first, I use two plastic bottle glue to stick, should when the ability after glue works does hull. Next, I follow hard paper with glue two plastic bottle close, reoccupy scissors cuts hard paper into the spare parts of cabin, the composition sticks the spare parts of cabin together with glue again. Finally, I use national flag of red paper make it, stick national flag together with toothpick, insert aboard, hull has been done.
工具准备好了以后，就开工了。先做船底，我将两个塑料瓶用胶水粘起来，要等到胶水干后才能做船身。然后，我把硬纸用胶水跟两个塑料瓶合起来，再用剪刀把硬纸剪成船舱的零件，作文又用胶水把船舱的零件粘在一起。最后，我用红纸做成国旗，用牙签把国旗粘在一起，插在船上，船身就做好了。
Next, should install ship sail to the boat. I insert core of a pen in hull first, unplug the head of core of a pen again, synthesize “ with the pen core that is inserted in hull 10 ” word, reoccupy white paper is stuck go up the sail that make a boat.
下一步，该给船安装船帆了。我先把一支笔芯插在船身，再把一支笔芯的头拔掉，和插在船身的笔芯合成“十”字，再用白纸粘上去做船帆。
Installation ends, I put the ship on surface, boat float is on surface, really martial! Ha! My boat has been done.
安装完毕，我把船放在水面上，船浮在水面上，真威武！哈哈！我的小船做好啦。
Through this small make, I understood a lot of reasons, also savor make brought joy with one's own hands.
通过这次小制作，我明白了很多道理，也尝到了亲手制作带来的快乐。(文/陈广铮)